The bather houses a belt mechanism that lowers nd recoils a reinforced polypropylene belt for a user of up to 22 stones, (140kg).

The bather has a removable battery pack, which provides around 20 lifts between charges, before being charged outside the bathroom using the supplied high-quality battery charger.

Why is 'Molly-bather' becoming the preferred bathing product of Independent Living Centres and professionals?

Molly allows a full, unrestricted soak, whereas Portable Bath Lifts leave the user about 4 inches from the bottom of the bath.

The rest of the family can use the bath normally without the struggle of lifting a heavy ‘Portable’ out of the bath.

Molly gives a good 20 lifts between charges (around a fortnights use), most portables offer only 5 to 10 lifts.

Molly has a ‘proper’ ergonomic grab rail and handholds all around the seat giving greater support for the user at all times.

Wall mounted belt bathers require the user to ‘step-in’ and ‘step-out’, but with a Molly the transfer starts and finishes outside of the bath, using the comfortable transfer seat.

Wall mounted bathers, when raising or lowering, take the user in the opposite direction to where they want to go, therefore requiring more ‘shuffling’. With Molly, the user is taken in the right direction and not left climbing the tiles.

Most belt bathers are sold for up to twice the price of a Molly bather.

Wall mounted bathers protrude over the bath by up to 5 inches, therefore impeding the transfer and bathing of the user. With Molly outside the bath, their bathing and transfer is much more comfortable and natural.

The wall mounted bathers requirevery structural fixings in both the wall and the floor, and the belt can also become inadvertantly detached from the floor cradle, resulting in an unsecured belt. Our floor fixing requires minimal loadings, the wall fixings are less stressed and the belt cannot be inadvertantly detached from the wall cradle.

Molly comes with a waterproof roving handset as standard, whereas with most belt bathers it is an optional extra.

Molly is the only product in its class to meet the new stringent CEN safety requirements.

Competitors raise limit switches are electro-mechanical and can be affected by humidity etc, ours is completely water and humidity proof.

Wall mounted belt bathers are mounted in the ‘shower’ area causing water to enter both their casing and corrode their metal parts. Molly is mounted outside the bath, water entry is minimal, and our case is dual vented to air out the belt properly.

Molly was designed with the help of Occupational Therapists at the ILC to create the safest and best belt bather on the market. This is why Molly Bather is the preferred bathing product of Independent Living Centres and professionals.